Frequency response + 0 / − 3 dB
0,1 Hz – 200 kHz
Pre-amplifier outputs
variable:
High level (RCA) 0...2,5 Veff / 22 Ohms, balanced (XLR) 0...5,0 Veff / 22 Ohms
fixed:
High level (RCA) 2,5 Veff / 22 Ohms, balanced (XLR) 5,0 Veff / 22 Ohms
discreetly designed Class A-HV-output stage in Double-Mono-Circuitry
Volume control
Gold contact relays controlled in 1 dB steps, - 90 dB to 0 dB
Headphone output
4.4 mm Pentaconn, discreetly designed high performance output stage, Class A operation up to 200 mA, 6 Ohms output impedance
High level (RCA)
250 mVeff ... 4,5 Veff / 10 kOhms
1 x AES-EBU 32...192 kHz / 16-24 Bit
S/P-DIF: 2 x Standard Coax, 2 x optical TOS-Link 32...192 kHz / 16-24 Bit and DoP DSD64 (0x05/0xFA Marker)
1 x BNC 32...192 kHz / 16-24 Bit
2 x USB DAC: Device-Mode 44,1 ... 768 kSps (PCM) and up to DSD1024*,
supports asynchronous data transfer. *DSD 512 and DSD 1024 with Windows PC and appropriate driver installed or Linux PC with Kernel 4.4 or higher only.
Supports DoP up to DSD 256 (0x05/0xFA Marker).
2 x HDMI IN, 1 x HDMI OUT with ARC (as an option)
PCM
Double-Differential-Quadruple-Converter with four 32-Bit Sigma-Delta
D/A converter per channel, 705,6 / 768 kSps conversion rate
DSD
T+A-True-1Bit DSD D/A converter, up to DSD 1024 (49,2 MHz), native bitstream
Upsampling
T+A signal-processor – synchronous upsampling with four selectable oversampling algorithms. FIR short, FIR long, Bezier/IIR, Bezier, NOS (non-oversampling)
Analogue filter
Phase-linear Bessel filter 3rd order, switchable with 60 or 120 kHz cut of frequency
Mains
200 – 240 V, 50 – 60 Hz, 30 Watts
Dimensions (H × W× D)
10 × 32 × 34 cm, 4 x 12.6 x 13.4 inch
Accessories
Remote control FM200, power cord, USB cable
Finishes
Alu silver anodized (43), Alu schwarz anodized (42)
Technical modifications reserved